Heating & Cooling Projects in Kingston

This older home was heated by an inefficient oil furnace that had become costly to live with. Beyond high fuel costs, the homeowner was also facing higher insurance costs, and comfort inside the home was inconsistent from room to room.

The goal was to replace the aging oil system with a better long-term solution: lower operating costs, fewer downsides tied to oil, and more controllable comfort throughout the home. Because airflow was poor and temperatures were difficult to manage, this job required more than swapping equipment — the system needed to be corrected so heat could be delivered evenly.

NapAir removed the old, loud oil furnace and installed a high-efficiency, 2-stage Continental gas furnace with an ECM motor. The installation was completed with a clean transition into the existing ductwork to avoid unnecessary replacement, while airflow was balanced properly to improve comfort in every room. A clean, serviceable venting layout was also completed to support reliable long-term operation.

Key elements of the work included:

• Removal of an inefficient, loud oil furnace
• Installation of a high-efficiency 2-stage Continental gas furnace
• ECM motor configuration for improved control and efficiency
• Clean ductwork transition adapted to the original duct system
• Airflow balancing to reduce hot/cold room swings
• Clean, serviceable venting layout

The Result

The home now heats more evenly and predictably, with improved comfort and better temperature control. The 2-stage operation allows the furnace to run more efficiently for most demand periods, reducing fuel consumption while maintaining a steady comfort level. Instead of managing an aging oil system with uneven room temperatures and higher operating costs, the homeowner now has a quieter, more efficient heating foundation designed to hold up over time.

When airflow is corrected, comfort stops fighting the house.

Close Details

This home was undergoing a full renovation, including the removal of electric baseboard heating that had become costly to operate. The challenge wasn’t simply choosing a new heat source — it was that the home’s layout and tightness made it impractical to run ductwork and rely on a forced-air system for whole-home heating.

The homeowner wanted a clean, space-efficient heating solution that could be installed inside a laundry closet without compromising comfort. That meant the system needed to be planned around tight clearances, minimal service space, and a piping layout that worked cleanly with the renovated interior.

NapAir installed a high-efficiency wall-hung boiler paired with a hydronic radiant wall heater and a heated towel rack that functions as a radiator in the washroom while also providing a convenient way to dry towels. The mechanical work was completed with careful routing and clean finishes to suit the confined installation area and the home’s updated layout.

Key elements of the work included:

• Removal of electric baseboard heating as part of a full renovation
• Installation of a high-efficiency wall-hung boiler designed for tight mechanical space
• Hydronic heat delivery through a radiant wall heater
• Heated towel rack used as a radiator in the washroom (comfort + towel drying)
• Piping layout adapted to tight clearances and renovation constraints
• Clean installation with serviceability considered despite limited space

The Result

The home now has a reliable hydronic heating system suited to its layout — without forcing ductwork where it doesn’t belong. Operating costs are reduced compared to electric baseboard heat, and comfort is delivered cleanly through properly integrated emitters. The finished mechanical work looks intentional within the renovated space and is designed to remain serviceable long-term.

When space is tight, the system still has to feel deliberate.

Close Details

This home was relying on an inefficient oil furnace and an older air conditioner that required frequent repairs. The main issues were high fuel cost and poor reliability — the homeowner wanted a better solution that didn’t feel like constant maintenance of outdated equipment.

The goal wasn’t just to replace components. It was to create a more dependable heating and cooling system with better comfort control and fewer “surprise failures,” while lowering ongoing operating costs. Because airflow and system layout affect comfort just as much as equipment choice, the indoor setup also needed to be improved.

NapAir removed the old oil furnace and the outdated air conditioner, then installed a cold-climate heat pump paired with a high-efficiency propane furnace for backup heat. The system was configured to provide efficient heating through most seasonal conditions, with backup heat available when colder weather demands it. To improve comfort throughout the home, the indoor equipment was relocated to a more central basement location to support better airflow distribution.

The outdoor unit was installed with clean placement and elevation to help reduce ice-related issues and improve service access, while the indoor relocation improved controllability and consistency room-to-room.

Key elements of the work included:

• Removal of an inefficient oil furnace and an older A/C system with frequent repair needs
• Installation of a cold-climate heat pump for primary seasonal heating and cooling
• Integration of a high-efficiency propane furnace for backup heat (2-stage)
• Relocation of the indoor system to improve airflow distribution across the home
• Elevated outdoor unit placement to help reduce ice-related issues and improve serviceability
• Clean installation and layout designed for reliability and long-term maintenance

The Result

Fuel consumption dropped significantly and comfort became more consistent and controllable throughout the home. The new system operates more quietly than the old oil furnace and A/C, and airflow improved due to the central relocation of the indoor equipment. Instead of managing frequent repairs and high operating costs, the homeowner now has a more reliable setup designed to hold up through seasonal demand.

When the old system keeps failing, the replacement has to earn peace of mind.

Close Details